Hybrid Powder Coating Uses
Peridium® Hybrid powder coatings feature good adhesion and resistance properties, offering an economical alternative to epoxies. Hybrid powders will have limited exposure due to the epoxy component, whereas slightly improved overbake resistance to yellowing is found in the polyester component.

Typical applications include:
- Business Machines
- Electrical Enclosures
- Fire Extinguishers
- Garden Tools
- Hospital Equipment
- Light Fixtures
- Office Furniture
- Oil Filters
- Power Tools
- Shelving
- Tool Boxes
- Under-hood Automotive

Technical Data for Hybrid Powder Coatings
Peridium® Hybrid (polyester/epoxy) powder coatings offer excellent application and performance characteristics. Peridium®'s tightly controlled particle size distribution provides extremely good first pass transfer efficiencies and edge coverage, along with the smoothest film available. These coatings exhibit good adhesion and resistance properties, offering an economical alternative to epoxies. Hybrid powders will have limited exterior exposure due to the epoxy component, whereas slightly improved overbake resistance to yellowing is found in the polyester component.


- Recommended cure schedule is 10 minutes @ 390°F, peak metal temp.
- The cure range for Hybrid powder is from 20 minutes at 350°F to 7 minutes at 400°F peak metal temperature.
Faster cure formulations are available.

Cured Film Properties (properties are typical):
PCI Powder Smoothness Rating ....................8-9 (high gloss)
Specific Gravity (ASTM D792) .......................1.2 to 1.8
Adhesion (ASTM D3359) ...............................5B (100%)
Gloss (ASTM D523) .......................................10-99
Pencil Hardness (ASTM D3363) ....................H-4H
Impact (ASTM D2794) ...................................160+ inch lbs.
Flexibility (ASTM D522) .................................1/8 inch – No fracturing
Humidity (ASTM D2247) ................................1,000+ hours
Salt Spray (ASTM B117) ................................1,000+ hours

Storage and Handling: Peridium® powder coatings should be stored at normal room temperatures and humidities (less than 80°F and 50-60% RH). Shelf life will be approximately 6 months to over a year depending on storage conditions. Always rotate inventories to ensure trouble-free powder application. When storage conditions are not the same as the application area, allow a 24-hour acclimation period within the application area to prevent moisture condensation in the powder. Always protect virgin and reclaimed powder from excessive heat and humidity.
Industrial Hygiene: Powder handling should always be done in conjunction with proper dust collection and personal protective equipment. Please refer to the Material Safety Data Sheet for more detailed information.

Hybrid Color Selector
Since gloss can not be represented accurately online, this page is limited to showing general color. Colors shown are internet representations and can only approximate the actual color. To accurately view gloss and color, click here to order a color card.

Use the chart below the color samples to determine which Peridium® powder coatings product will work best for your application.

These colors represent commonly available products. For specific colors, gloss and special effects, please contact your Diamond Vogel® Representative or click here.

Warm Brown S/G
EH-0446 Hybrid
Cream S/G
EH-0535 Hybrid
Black Texture
EH-9595 Hybrid
Buff Yellow Primer
EH-3352 Hybrid
Fieldstone Gray Texture
EH-0442 Hybrid
Beach Sand Texture
EH-0531 Hybrid
Use the chart below to determine which Peridium Powder Coatings product will work best for your application.
Example: ET-9390: E = Powder Coating, T = TGIC Polyester, 9 = Black, 3 = 10 min. @ 390ºF, 9 = 90 @ 60º Gloss
First Letter Indicates Type of Product:
E = Powder Coatings
Second Letter Indicates a Family of Coatings:
A = Acrylic
E = Epoxy
H = Hybrid
M = Miscellaneous Cure
N = Non-Emissive Urethane
P = Primid Polyester
T = TGIC Polyester
U = Urethane, Emissive
First Number Indicates Color:
0 = Off-Whites, Clears
1 = White
2 = Aluminum/Metallic
3 = Yellow
4 = Orange
5 = Red
6 = Green
7 = Blue
8 = Brown, Charcoal
9 = Black
Second Number Indicates Cure Range (Substrate at peak metal temperature):
1 = 10 min. @ 450ºF
2 = 10 min. @ 425ºF
3 = 10 min. @ 390ºF
4 = 10 min. @ 375ºF
5 = 15 min. @ 350ºF
6 = 20 min. @ 325ºF
7 = 20 min. @ 300ºF
8 = 20 min. @ 275ºF
9 = Below 275ºF
Third Number Indicates Initial Gloss at 60º:
0 = Wrinkle, Texture, Special Effect
1 = 0-19
2 = 20-29
3 = 30-39
4 = 40-49
5 = 50-59
6 = 60-69
7 = 70-79
8 = 80-89
9 = 90-99
Home | About Us | Contact Us | Links | Privacy Policy
The Peridium® Edge | Powder Technology | Color Information | Technical Information
Copyright 2008 Diamond Vogel. All Rights Reserved.